Applications of Bernauli's Principle

Bunsen Burner

• When the burner is connected to a gas supply, the gas flows at high velocity through a narrow passage in the burner, creating a region of low pressure.
• The outside air, which is at atmospheric pressure, is drawn in due to the low pressure inside the tube and the air outside mixes with the gas.
• The mixture of gas and air enables the gas to burn completely to produce a clean, hot, and smokeless flame.

Aeroplane

The wing of the aeroplane is known as the aerofoil

The picture below shows the cross section of the aerofoil 

• When a wing in the form of an aerofoil moves in air, the flow of air over the top travels faster and creates a region of low pressure. The flow of air below the wing is slower resulting in a region of higher pressure.
• The difference between the pressures at the top and underside of the wing causes a net upward force, called lift, which helps the plane to take-off.

Insect spray

• When the plunger is pushed in, the air flows at a high velocity through a nozzle.
• The flow of air at high velocity creates a region of low pressure above the metal tube. The higher pressure of the atmospheric air acts on the surface of the liquid insecticide causing it to rise up the metal tube.
• The insecticide leaves the top of the metal tube through the nozzle as a fine spray.